|
Air bell
|
An air-activated locomotive standard air bell
|
Air bell
Mounting bracket
Hardware
Air lines
Bell switch
|
|
Air cleaner (pre-cleaner)
|
An engine air intake pre-cleaner. The cleaner utilizes a venturi to spin the intake air and centrifugally remove particulates prior to entering the standard engine air intake filter.
|
Air cleaner
Mounting hardware
|
|
Air conditioner
|
33,000 BTU air conditioner
|
Air conditioner
Condensor
Brackets and hardware
Wiring harness
|
|
Broom (rotary)
|
8’ wide ½ poly, ½ steel bristle hydraulically operated rotary broom
|
Broom assembly
Hydraulic manifolds
Hoses
Control and wiring
|
|
Cab air filter (two-stage pressurized)
|
The two-stage air filter replaces the standard cab air intake filter for improved air filtration. Especially useful in dusty or corrosive environments.
|
Filter canister
Filter
Replacement lower filter housing
Connecting hose and clamps
Mounting hardware
Instructions and hole-drilling template
|
|
Corrosion resistance (Nyalic)
|
A clear corrosion-resistant top coating applied to painted surfaces, fasteners, and connectors.
|
Applied at factory during painting
|
|
Fire extinguisher
|
10# dry chemical fire extinguisher for A, B, and C class fires.
|
Fire extinguisher
Mounting bracket
Hardware
|
|
Heater (engine oil pan – Cummins QSB/QSC)
|
500 watt 110 VAC adhesive heating pad attaches to engine oil pan.
|
Heater
Sealant
Cord clamps
|
|
Heater (fuel tank)
|
1000 watt 120 VAC immersible heater
|
Heater
Connecting fittings
Cord clamps
|
|
Heater (hydraulic oil reservoir)
|
250 watt 110VAC immersible heater
|
Heater
Cord clamps
|
|
Heater (transmission oil)
|
125 watt 120 VAC immersible heater
|
Heater
Connecting fittings
Cord clamps
|
|
Ice breaker
|
A hydraulic override to increase rail wheel pressure for breaking up ice on rails.
|
Hydraulic manifold
Hoses
Wiring and switch
|
|
Lube system (automatic)
|
A single-point auto-dispensing lubricating system.
|
Dispenser
Tubing
Fittings
Single-point manifold
|
|
Lube system (single point)
|
Single-point lube system for single steer high-pressure caliper axles.
|
Manifolds
Fittings
Tubing
Mounting brackets
Hardware
|
|
Mirrors (front right-hand side)
|
Includes cab side mirror and rail wheel aligning mirror for right-hand side of cab.
|
Mirrors
Brackets
Mounting hardware
|
|
Mirrors (heated front left-hand side)
|
Includes cab side mirror and rail wheel aligning mirror with heater elements for left-hand side of cab.
|
Mirrors
Brackets
Wiring harnesses
Mounting hardware
|
|
Mirrors (heated front right-hand side)
|
Includes cab side mirror and rail wheel aligning mirror with heater elements for right-hand side of cab.
|
Mirrors
Brackets
Wiring harnesses
Mounting hardware
|
|
Radio remote control
|
FCC-licensed frequency operator transmitter and vehicle receiver
|
Transmitter
Receiver
|
|
Rail air reservoir (100-gallon capacity)
|
Dual 50-gallon air reservoirs
|
Reservoirs
Fittings
Hoses
|
|
Rail wheel flange lubricators
|
Automatically dispenses a dry graphite lubricant against the rail wheel flange to reduce friction between the wheel flange and the rail when moving through curves.
|
Dispensers (four each)
Mounting brackets (four each)
Lubricant sticks
Mounting hardware
|
|
Rail wheel continuity
|
A cross-wheel continuity cable for ensuring electrical continuity between right and left rail wheels for engaging electrically activated signals.
|
Wiring cable
Clamps
Connectors
Hardware
|
|
Remote vehicle monitor/ShuttleTrak
|
Remotely monitored vehicle output with diagnostic functions
|
Antenna
Transceiver
Wiring
Mounting hardware
|
|
Seat (high-back with headrest)
|
High-backed four-way air-cushioned seat with improved lumbar support and headrest.
|
Seat
Installation hardware
|
|
Spark arrestor
|
A baffle extension for the exhaust pipe to reduce / eliminate sparks from the exhaust gases.
|
Spark arrestor
Extension tubing
Connecting clamps
|
|
Switchman II
|
Hand-held emergency stop remote for ground personnel.
|
Receiver
Hand unit and holster
Wiring harness
Installation instructions
|
|
Snow plow (adjustable V)
|
Hydraulically controlled multi-position V-blade snow plow.
|
Snow plow
Manifolds
Hoses
Wiring
Hardware
|
|
Spotlight (cab front / remote control)
|
A remotely controlled (from inside the cab) front-mounted spotlight.
|
Spotlight
Mounting bracket
Hardware
Wiring
|
|
Tire (foam filled)
|
Polyurethane foam-filled tires
|
Tire
Foam filling
Rim assembly
|
|
Tire (nitrogen filled)
|
Inert nitrogen gas-filled tires (factory filled)
|
Tire
Nitrogen charge
Rim assembly
|
|
Train air auxiliary (rear only)
|
A general-purpose auxiliary air line mounted above the rear deck.
|
Hoses
Mounting bracket
Fittings
|
|
Train brake air gauge (Graham-White)
|
Large heavy-duty train brake air gauge.
|
Gauge
Fittings
Mounting hardware
|
|
Work lights (cab – LED)
|
Two front and two rear cab-mounted LED work lights.
|
Lights
Wiring
Switch
Mounting hardware
|